"YMO" brand HEC coal combustion catalyst holds the features of high efficiency and energy-saving, green in one of anthracite, bituminous coal, coking coal, lignite, peat, and has good compatibility. The advent of HEC coal combustion catalyst is to save the limited resources, and reduce coal combustion caused by air.

Add:Flat 1503,15/F Tower 1 Metropolis Office,10 Metropolis Drive. Hung Hom,KLN,Hong Kong

Tel:(00852) 3168 2553

mainland mobiles:0086-186-38808855

Fax:(00852) 3549 6103

E-mail:ymo@ymo.hk

Web:http://www.ymo.hk/english

Application

Position:HK Mingyang International Group Co.,Ltd. > Application

 

HEC coal combustion catalyst, Ming Yang, Hong Kong International (Holdings) Limited to develop and produce new products, energy saving and environmental protection. The catalyst is a non-combustible, non-explosive, non-volatile, odor-free liquid products, the PH value: 5.5 ~ 6.5 acidic, density: 1.05 ~ 1.2.

 

The application areas are: thermal power plants, cement plants, steel mills and coal-fired boilers:

 

The HEC-A coal combustion catalyst in conventional thermal power plant ash 0.1% (of coal) 

  • The economizer rate (above 300MW including 300MW) coal saving 2% -3.5% (300MW including 300MW) coal saving of 2.5% -4.5%
  • A fluidized bed boiler: individually or in the coal is broken with the spraying in the transport belt to add a catalyst.
  • Powder coal stove: the coal into the mill before the catalyst added to the conveyor into the mill into a mill feeder into the mill feed chute.

 

The HEC-B coal combustion catalyst in conventional content of cement plant 0.1% (of coal), coal saving rate of 5% -10%

  • Kiln: the coal into the mill before the catalyst added dropwise into the mill conveyor into the mill feeder or mill feed tank
  • Shaft kiln: in the raw mill feed conveyor, to the feeder or on the abrasive groove trickle

 

The HEC-D coal combustion catalyst in conventional content of coal industry 0.1% (of coal), coal saving rate of 5% -12%

  • The other chain furnace: catalyst for pulverized coal injection (powder in the bottom), into the blast furnace in the form of a mechanical or artificial mixing catalyst sprayed join.

 

The HEC-E-coal combustion catalyst in general coal-fired industrial and domestic boilers in conventional dosage of 0.1% (of coal), coal saving rate of 6% -20%

  • The steel plant: the coal into the mill before the catalyst added to the conveyor into the mill into a mill feeder into the mill feed chute.

 

CopyRight © 2012-2015 Hong Kong mingyan international (group) Co., LTD. All rights reserved contact telephone: 00852-5615 8988
address: Hong Kong dry central, 137-139, three set building to 12 floor